Cold Transfer-Sheet-fed Offset-Holographic-CF5.1

Metallized holographic Cold Transfer Product for Sheet-fed Offset Printing

Characteristic

Special product for cold transfer applications on sheet-fed offset presses in conjunction with oxidative drying adhesives
Excellent edge sharpness with optimized release behavior
Good overprintability with conventional sheet-fed offset inks and UV inks
Good adhesion to oxidative / conventional drying glues
High production speeds of over 10,000 sph are possible
Very High Gloss

Areas of application

Applicable on sheet-fed offset presses with corresponding cold transfer module
Suitable for a wide range of coated image printing and label papers as well as for coated folding boxboard

Processing parameters

Optimized adhesive application quantity: 1.5 - 3.0 g/m² depending on the absorbency of the substrate
Carefully test the suitable adhesive for your specific print product. Adapt the adhesive application to the properties of the substrate. It is recommended to overcoat the cold transfer application accordingly to achieve sufficient abrasion and rub resistance.

Available patterns

Rainbow

Fans

Pinwheels

Rocks

Small-Rocks

Drops

Broken-Glasses

Sprinkles

Rings

Pieces

Small-Pinwheels

Tiny-Drops

Tiny-Pieces

Mini-pillar
horizontal

Mirror-surface
horizontal

Mirror-surface
vertical

Wire-surface

Formats

Core size

Available on 3 inch and 6 inch cardboard core.

Various roll sizes available - please inquire!

Certificates

Under optimum transfer conditions, all our products have a high to very high gloss (except satin and matt products) and high abrasion and rub resistance. However, as these values depend on many production parameters and not least on the substrate and printing process used, we cannot give any measured values here.

All United Transfer products have been developed for their respective specific applications. However, experience shows that substrates, printing machines and operating conditions can vary. Therefore, users of our products are urged to verify that the selected product types are suitable for their specific applications by making test prints under production conditions. For this purpose, samples are available from us upon request. If you need assistance, we will be happy to provide advice and support.

For safe storage we recommend to leave the product in its original packaging, store in a cool, dry place without direct sunlight. The product should be processed within one year from the indicated production date.

All information and recommendations are given by us in good faith on the basis of our practical experience - but without guarantee. We refer to our general terms and conditions of sale and terms of delivery.